Pressure Test Pump
Model LR-Cal LPP 60
Generation of pressure and vacuum -0,95...+60 bar
- Pneumatic (operated with ambient air)
- Pressure generation to +60 bar (870 psi)
- Vacuum generatio to -0,95 bar (-28 inHg)
- Portable
- Simple and easy operation
Description
LR-Cal LPP 60 Description
The pressure test pump LR-Cal LPP 60 is used to generate pressure and vacuum for checking, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements. These pressure tests may be carried out in laboratories, workshop or on site at the measuring point.
If the instrument to be tested and a sufficiently accurate reference measuring instrument are connected up to the test pump, the same pressure is applied to the two measuring instruments when the pressure test pump LR-Cal LPP 60 is operated. By comparing the two measure valuses at random pressure values, the accuracy can be verified or the instrument under test can be adjusted.
Despite its compact dimensions, the pressure test pump LR-Cal LPP 60 is easy to operate and allows for exact generation of the required test pressures; a change-over switch enables the generation of vacuum as well. The LR-Cal LPP 60 is fitted with a fine adjustment valve for generation of high pressure and a precise adjustment of pressures.
The reference instrument is screwd directly on the top of the pump and the unit under test is connected by means of the connection tube incorporating an adapter 1/4" BSP female thread (freely rotating), contained in the scope of delivery.
Standard scope of delivery:
- Pressure & vacuum test pump LR-Cal LPP 60
with reference port 1/2" BSP female (freely rotating) on the top of the pump and
with rest item port 1/4" BSP female (freely rotating) at the pressure hose connected to the pump - Test hose 0.5 m
- Manual
Options: see Accessories.
Specification
LR-Cal LPP 60 Specification
| Pressure generation: | 0 to 60 bar = 0 to 870 psi, switchable to |
| Vacuum generation: | 0 to -0,95 bar = 0 to -28 inHg |
| Pressure ports (standard version): |
For reference instrument: 1/2" BSP female, freely rotating, with integr. O-ring, on the top of the pump For test item: 1/4" BSP female, freely rotating, with integr. O-ring, at the pressure test hose of the pump |
| Materials: | Aluminium, brass, ABS, NBR |
| Priming pressure: | Hand lever |
| High pressure: | Volume adjustment valve |
| Fine adjustment: | Volume adjustment valve (fine adjustment, large volume) |
| Dimension: | approx. 290 x 185 x 65 mm |
| Weight: | approx. 960 g |
| Order-Code: | LPP-60 |
Special version with reference pressure port 1/4" BSP female rotating: Order-Code LPP-60-G14
Special version with reference and test item pressure ports 1/4" NPT female: Order-Code LPP-60-N14
Accessories
LR-Cal LPP 60 optional Accessories
| Order-Code | Description | Image |
| LPP-VOLUMEN-TOOL | Tool, to be placed on the volume variator vent, to simplify operation of the fine adjustment (high pressure generation and fine adjustment) |
 |
| LPP-60-KOFFER | Transit case with custom foams, with space for 1 pressure test pump, sets of adapters and a reference instrument up to DS 100 mm resp. 85x85 mm. |
 |
| LPP-ADAPTER-BSP | Set of stainless steel BSP adapters, with integr. O-rings (no tools required to change test item): 1/8" BSP, 3/8" BSP, 1/2" BSP female + 1/2" BSP male |
 |
| LPP-ADAPTER-NPT | Set of stainless steel NPT adapters 1/8" NPT, 1/4" NPT, 3/8" NPT and 1/2" NPT male |
 |
| LPP-ADAPTER-M | Set of stainless steel "metric" adapters, with integr. O-rings (no tools required to change test item): M12 x 1.5 and M20 x 1.5, and MINIMESS 1620 adapter |
 |
| LPP-WARTUNG | Maintenence / Service Kit (O-rings, gaskets, seals, screws) | |
| LPP-SCHLAUCH-S-0050 | SPARE PART: Pressure test hose 0.5 m complete with fittings, pressure port for test item 1/4" BSP female freely rotating, with integr. O-ring |
 |
