Accessibility Tools

Skip to main content

LR-Cal FLUID 100-45
LR-Cal FLUID 100-45-2I
Portable temperature calibration bath
-35...+140°C

LR-Cal FLUID 100-45 temperature micro bath
LR-Cal
  • Portable micro bath
  • Temperature range -35°C...+140°C
  • Accuracy ±0.15°C, stability ±0.02°C
  • Calibration bath volume approx. 500 cm³
    (60 mm diameter, 170 mm depth)
Micro bath LR-Cal FLUID 100-45 with fixing elements

LR-Cal FLUID 100-45
with holder for reference and test specimens

Scheme micro bath reservoir LR-Cal FLUID 100-45

LR-Cal FLUID 100-45
Scheme: Calibration bath tank

LR-Cal FLUID 100-N options + accessories

DAkkS
certification

Code: DKD-T-KAL-TK-6T
DKD-T-KAL-TK-6T

Option:
DAkkS certificate

For the measuring chain consisting of display of the calibrator and internal reference sensor, 6 measuring points.

Windows-PC
software

Code: 599.0.000.0003.0
599.0.000.0003.0

Accessory:
Windows-PC software Aq2Sp
incl. RS232 connection cable

(Delivery as password protected download link)

RS232 - USB
converter

Code: RS232-USB-KONV
RS232-USB-KONV

Accessory:
Interface converter RS232 to USB


Extension tube

Code: FLUID100-ER
FLUID100-ER

Accessory:
Extension tube
to increase the immersion depth
Total length 250 mm
Usable immersion depth 230 mm
Minimum temperature -9°C
Horizontal temperature uniformity ±0.1°C (measured 50 mm from the bottom)
Vertical temperature uniformity ±0.1°C (or ±0.15°C for temperatures below 0°C, measured 0...150 mm above the floor

When used with silicone oil 200C5:
Working range -9...+130°C

Conversion kit to
dry block calibrator

Code: FLUID-100-45-INS
FLUID-100-45-INS

Dry block conversion kit
made in aluminium
Diameter 44.7 mm
Depth 175 mm
With 8 holes (drillings) mm:
3.5+4.5+4.5+6.5+6.5+6.5+8.5+10.5
Incl. tools for mounting and dismounting


Cooling coil

Code: FLUID200-KS
FLUID200-KS

Accessory:
Stainless steel cooling coil

The cooling coil shortens the cooling time, and it can also shift the start of the working range of the calibrator downwards (but above 0°C). Requires fresh water connection.

Sturdy case
Aluminum

Code: TEMPKAL-KOFFER
TEMPKAL-KOFFER

Accessory:
Sturdy case made of aluminum with molded foam inserts.

Dimensions: 450 x 280 x 380 mm
Weight: 4.8 kg
Shipping dimensions: 600 x 370 x 500 mm

Soft bag
with shoulder trap

Code: TEMPKAL-TASCHE
TEMPKAL-TASCHE

Spare part:
Carrying bag with shoulder strap

Dimensions: 410 x 220 x 380 mm
Weight: 1.45 kg
Shipping dimensions: 600 x 370 x 500 mm

(1 bag is included in the delivery of the calibrator)

Silicone oil
200C5

Code: FL100-FLUID-200C5
FL100-FLUID-200C5

Accessory:
Bottle with calibration medium
500 cm³
Silicone oil 200C5
for range -40...+130°C

Silicone oil
47V10

Code: FL100-FLUID-47V10
FL100-FLUID-47V10

Spare part:
Bottle with calibration medium
500 cm³
Silicone oil 47V10
for range -30...+150°C

(1 bottle included in the delivery of the calibrator)

Information about operating fluids for temperature calibration baths

Calibration liquids for LR-Cal temperature calibration baths

Applications:

  • Thermostatic fluids for micro baths and thermostatic temperature calibration baths

Main Characteristics:

  • Operating range -50...+200°C
  • High stability
  • Good thermal conductivity
  • Nearly odourless
  • Long service live
  • Packaged in bottle or canister
  • Different types for a wide range applications
  • Low toxicity
  • Low viscosity and corrosovity

Our thermostatic fluids are suitable for use in liquid thermostatic calibrators and thermostatic baths for applications from -50°C to +200°C.
The choice of thermostatic fluid is the most important aspect for obtaining the best results with regard to operation and temperature control of calibrators and baths.
These fluids have perfect thermodynamic characteristics to guarantee the best performance in the various fields of application, ensuring safe and reliable operation as well as optimum heat transfer efficiency.
Silicone-based fluids are chemically inert substances that do not affect metals, are resistant to weathering and, when used correctly, the very low formation of cracking and oxidation ensures a long service life.

Most of our thermostatic fluids are available in different containers: 500 cm³ bottles or 9 kg canisters (25 kg on request).

Temperature application ranges of the various operating fluids:

Type of calibration
medium (liquid)		 Usable
range
(1)		 Temperature above which fume hood
should be provided
(2)		 Fume
burning
(3)		 A viscosity of 10 cst exists at a temperature of
(4)		 Freezing temperature
(5)
Glycol 56% + water * -40...+90°C +70°C >110°C  +20°C -43°C
Silicone oil 47V5 -40...+130°C +110°C +136°C  +5°C  -65°C
Silicone oil 47V10 -30...+150°C +120°C +160°C  +20°C  -65°C
Silicone oil 47V20 -20...+200°C ** +130°C +230°C  +60°C  -60°C
Silicone oil 47V50 +30...+250°C ** +140°C +280°C  +160°C  -55°C
Silicone oil 47V100 +50...+200°C ** +170°C >300°C  +200°C  -55°C
Silicone oil 47V150 +50...+200°C ** +190°C >300°C  -/-  -55°C
Note: Note text:
* Mixture of 56% Glycol + 44% water
** In order to avoid gelling, it is recommended not to exceed a temperature of 200°C for a long time; even for fluids with wider operating ranges
(1) Usable range
The “usable range” of a calibration liquid is the temperature range in which it can be used under optimum conditions. The range may be limited by viscosity, flash points, freezing points, boiling points, evaporation rates, tendency to gel (or polymerize), etc.
There is no liquid that covers extremely wide temperature ranges. Therefore, you should ideally use a separate calibration liquid for each temperature range. The recommended range is the one in which the viscosity is not optimal, but still reaches values that allow proper use.
(2) Use of a fume hood
The use of an exhaust hood when using temperature calibration baths prevents users from inhaling vapors from calibration liquids. It is best to use extraction devices near the access opening to the calibration bath. Vapors can otherwise settle on the mucous membranes of the eyes or on the skin, causing discomfort. Silicone oils can form benzene and formaldehyde when they decompose at high temperatures. The table shows the temperature above which an extractor hood should be used.
(3) Flash point
The table shows the temperature value at which the presence of an open flame can ignite vapours combustion.
(4) Viscosity
Viscosity is a measure of the flow resistance of a liquid. Viscosity increases with decreasing temperature. Kinetic viscosity is the ratio of absolute viscosity to density. This is measured in stokes and centistokes (cSt). 1 cSt = 1 stoke divided by 100. The higher the cSt, the more viscous or dense the liquid. Excessively viscous liquids place a strain on the stirring and pumping mechanisms of the calibration bath and do not transfer heat sufficiently. The table shows the temperature value below which the performance of the temperature calibration bath is no longer optimal. The equivalent value of water at 20°C is 1.1 cst.
(5) Freezing point
Silicone oils also change their state below a certain temperature by solidifying. The table shows the value at which the calibration fluid changes its state and solidifies.

Other physical and chemical properties

Specific heat
The specific heat is the amount of heat required to raise or lower the temperature by 1 °C per kg. The specific heat, called CP, is expressed in Kcal/Kg °C. The energy required to heat or cool the calibration liquids depends on the amount of liquid contained in the calibrator in kg and its specific heat. A high specific heat value requires more energy to change the temperature, but offers greater temperature stability. The average CP of silicone fluids is 35 Kcal/Kg °C. The CP of water at 20 °C is equal to 1.

Thermal conductivity
Thermal conductivity is the ability of the liquid to transfer heat from one molecule to another. The better the heat transfer, the faster the liquid heats or cools. Better thermal conductivity improves the temperature uniformity in the reservoir of the calibration bath.

Expansion
All liquids have a coefficient of thermal expansion. This indicates how much the volume of a liquid changes (expands or contracts) when the temperature changes. Liquid expansion has an important impact on the safety, cleanliness and maintenance of temperature calibration baths. If calibrators are filled with too much liquid at a low temperature and then heated without regard to the increase in volume, they can overflow.

If too little liquid is filled in the reservoir, below the level of the heating elements, the temperature rise of the non-immersed part of the heating elements could ignite the liquid.

Gelation (polymerization)
The gelling temperature is the temperature at which silicone fluids oxidize, gel and turn into a viscous slurry. The main cause of this phenomenon is oxidation. Although silicone fluids can be used safely up to their flash point, the susceptibility to polymerization increases when used above their oxidation point. To prevent polymerization, it is advisable to keep the operating time above the oxidation point of the silicone oil used as short as possible in order to keep contaminants (salts, other oils and oxidizing agents) away. The calibration fluid must be replaced if it becomes dark, viscous or temperature unstable. It is important to limit the application time at high temperatures to prevent the oil from degrading and to extend its service life.