MT 6000

Hand-held measuring device for contact and non-contact measurement of rotational speeds and belt speeds
Contact measurement:
Speed 0.5 to 19,999 rpm
Belt speed 0.05 to 1,999.9 m/min
(0.2 to 6,560 feet/min)
Non-contact measurement:
Speed 5 to 99,999 rpm
Accuracy ±0.05% of measured value ±1 digit

MT 6000 digital handheld tachometer in protection case

MT 6000 digital handheld tachometer in case

Description

MT 6000 description

The MT 6000 multifunction hand-held tachometer is a robust precision measuring instrument for non-contact speed measurements and for contact measurements of rotational speed and velocity.

The instrument is equipped with an automatic measured value memory, which stores the last, the highest and the lowest measured value. The values appear in the display window when the memory button is pressed.

Very easy to read LCD display, accurate reading and playback, advanced power saving circuits, automatic range switching. This tachometer is equipped with CMOS microprocessor with quartz controlled timing. The design features guarantee very high measurement accuracy and short response time.

Ranges

MT 6000 ranges

Order-Code: 220.0.000.6000.0

Contact measurement:
0.5 to 19,999 revolutions per minute (rpm)
0.05 to 1,999.9 meters per minute (0.2 to 6,560 feet/min)

Non-contact measurement:
5 to 99,999 revolutions per minute (rpm)

Resolution:
0.1 for readings up to 1,000 rpm and up to 1,000 feet/min
1.0 for measured values from 1,000 rpm and from 1,000 feet/min
0.01 for measured values up to 100 m/min
0.1 up to measured values from 100 m/min

Display accuracy:
±0.05% of measured value ±1 digit

Specification

MT 6000 specification

Display:	LCD, 5-digit, 7-segment digits, 10.2 mm high The display is always in the correct position, regardless of which side of the measured value acquisition (contactless or with contact) is used.
Measuring cycle:	1 measurement per second (from 60 rpm for non-contact measurement, from 6 rpm for contact measurement)
Measuring distance for non-contact measurement:	50...150 mm, with shielded ambient light conditions up to max. 300 mm
Standard accessories:	Carrying case with foam insert 600 mm reflective tape Probe tip Hollow cone Impeller Operating manual
Working temperature:	0...50°C (+30...+120°F)
Weight:	approx. 300 g (without case)
Dimensions:	215 x 65 x 38 mm
Housing material:	ABS plastic
Supply:	4 batteries Mignon R6, 1.5 V Alkali IEC R6 or 4 rechargeable NiCd batteries Mignon RC6 1.2 V. The batteries are NOT included in the delivery
Battery change indicator:	Display shows "LO" when batteries need to be replaced