Description
LR-Cal LSP 100-P Description
The Pressure comparison test pump LR-Cal LSP 100-P is used for generating pressure and vacuum for the testing, adjusting and calibration of mechanical and electronict pressure measuring instruments by means of comparison measurements. These pressure and vacuum tests can be carried out in laboratories, workshops or on site at the set measuring point.
When the device under test and a reference measuring instrument with an adequate accuracy are connected to the same pressure comparator, the same pressure will act on both measuring instruments after actuating the pump. A calibration or adjustment can be carried out by comparing the two measure values at any pressure or vacuum value.
In order to enable an accurate generation of the measuring points, the pressure comparison pump LR-Cal LSP 100-P is provided with a fine adjustment valve.
This manual pressure pump uses ambient air as medium. Easy to use, no external pressure or vacuum source needed.
Specification
LR-Cal LSP 100-P Specification
Pressure range |
[bar] |
to+100 bar, switchable to vacuum to -0.95 bar |
Medium |
|
ambient air |
Pressure ports |
|
2 x 1/2" BSP female rotating swivel nut (2 adapters to M20x1.5 female are included in delivery) |
Pressure fine adjustment |
|
Fine adjustment valve, sensitivity ±0.1 mbar |
Dimension |
[mm] |
450 x 262 x 170 |
Weight |
[kg] |
5,6 |
Design |
|
Manual lever pump with fine adjustment and pressure/vacuum-switch |
Order-Code |
|
LSP-100-P |
Scope of standard supply:
- 1 LR-Cal LSP 100-P pressure comparison test pump
- 2 threaded adapters M20x1.5 female to 1/2" BSP mail, with O-rings
- 1 Set with spare O-rings
- 1 Operating manual (german/english)
Accessories
LR-Cal LSP 100-P Accessories
Order-Code |
Description |
Image |
LSP-100-P-WARTUNG |
Maintenance kit (gaskets etc.) |
|
BLINDSTOPFEN-G12-VA |
Blind plug 1/2" BSP male in stainless steel, PN 3600 bar To close both pressure ports of the pump you need 2 pcs. |
 |
LSP-ADAPTER-SET |
Set of threaded adapters, in stainless steel, for pressure ports 1/2" BSP male to 1/4" BSP female, to 1/4" NPT female, to 1/2" NPT female and to M20x1.5 female, incl. set of PTFE gaskets |
 |
LSP-100-P-UMSCHALTER |
SPARE PART: pressure/vacuum-switch (only as spare part for repair) |
|
DOWNLOADs
LR-Cal LSP 100-P Datasheet / Operating manual