HOME > 4: Temperature Calibrators > FLUID 100 - FLUID 200 - FLUID 200-H

Portable Temperature Calibration Bath FLUID 100 FLUID 200 FLUID 200-H

Portable Temperature Calibration Fluid Bath • FLUID 100:    -10°C...+125°C • FLUID 200:    ambient temperature ...+200°C • FLUID 200-H:    ambient temperature ...+220°C Datasheet Operating Manual FLUID 100 Operating Manual FLUID 200

• for mobile and stationary use
• micro processor controlled (PID)
• ramp function
• thermostat test
• type FLUID...-2I: with 2 inputs for external reference and test specimen
• Recommended for the calibration of glass thermometer
• OPTIONAL: conversion kit to Dry Block Temperature Calibrator

Typical applications:

• Calibration and checking of all kind of thermometer
• Calibration and checking of thermostats
• computer aided calibration via RS232 interface

Technical Data:

NOTE: the stated accuracy is valid at ambient temperature +23°C and is guaranteed for 1 year.

Scope of standard Supply:

• Portable fluid bath FLUID
• Electr. power cable
• Fuses kit
• Electr. connection cables for thermostat tests
• Operating manual
• Certificate of calibration, traceable
• Bottle 500 cm³ with silicone oil
• Support for glass thermometer
• Closing top used for transport
• Soft bag

Additional for type FLUID ...-2I:

• Version with data acquisition card and two input devices to measure
  Pt 100 (3-/4-wire), Range -100...+700°C, Accuracy ±0.3°C
  Thermocouple type J, Range 0...1000°C, Accuracy ±1°C
  Thermocouple types K/N/R/S, Range 0...1300°C, Accuracy ±1°C
• Set of black and red connection cables with plugs

Optional Accessories:

• External reference probe, Pt 100 sensor, optional with DKD certification
    
• PC-Windows Software AQ2sp and RS232 cable
  With the software AQ2sp it is possible to remote-control the calibrator with a PC. Automatic or manual calibration of one or more test specimen, stress tests, life cycle tests, thermostat tests. Printing of calibration certificates.
    
• Extension tube to increase the dept of the liquid tank of
  FLUID 100 and FLUID 100-2I:
  
  Usable diameter 60 mm, usable dept 230 mm
  Minimum temperature: -9°C at 20°C ambient temperature
  If used with silicone oil 200C5: Temperature range -9...+130°C at ambient temperature +20°C.
  Horizontal temperature uniformity: ±0.10°C (measured at 50 mm from the bottom)
  Vertical temperature uniformity: ±0.10°C (±0.15°C at temperatures below 0°C), over the dept of 150 mm from the bottom
    
• Extension tube to increase the dept of the liquid tank of
  FLUID 200, FLUID 200-2I, FLUID 200-H
  and FLUID 200-H-2I:
  
  Usable diameter 60 mm, usable dept 230 mm
  If used with silicone oil 47V20: Temperature range 90...200°C at ambient temperature +20°C
  Horizontal temperature uniformity: ±0.20°C (measured at 50 mm from the bottom)
  Vertical temperature uniformity: ±0.10°C, over the dept of 150 mm from the bottom
    
• Cooling coil in stainless steel for
  FLUID 200, FLUID 200-2I,
  FLUID 200-H and FLUID 200-H-2I:
  
  The cooling coil shortens the cooling time, also the minimum calibration temperature can be decreased.
    
• Conversion kit for fluid bath FLUID (all models)
  to get a Dry Block Temperature Calibrator
  
  Temperature range for models
  FLUID 100 and FLUID 100-2I:
            -10...+125°C
  Temperature range for models
  FLUID 200 and FLUID 200-2I:
             ambient temperature to +160°C
  Block in aluminum, diameter 60 mm, usable dept 170 mm
  Heating time from -10°C to +110°C: 45 minutes
  Cooling time from +20°C to -10°C: 47 minutes
  Stability: ±0.04°C
  Vertical temperature uniformity at 0°C: ±0.03°C; at 80°C: ±0.06°C
  Block with 9 holes 4.0 - 4.0 - 4.5 - 5.5 - 6.5 - 6.5 - 8.5 - 10.5 - 12.5 mm
  or block without holes (to be drilled by customer).