HOME > 4: Temperature Calibrators > FLUID

Temperature Calibrator (portable fluid baths) FLUID 100 • FLUID 200 • FLUID 200-H

Portable Fluid Bath Temperature Calibrator Type FLUID 100 Range: -10°C to +125°C Portable Fluid Bath Temperature Calibrator Type FLUID 200 Range: ambient temperature to +200°C Portable Fluid Bath Temperature Calibrator Type FLUID 200-H Range: ambient temperature to +220°C

Optional all three types can be converted to a dry block temperature calibrator.

Features:

• for mobile and stationary use
• ramp function
• thermostat tests
• recommended for the calibration of glass thermometer
• simultaneous display of temperatures of internal reference, external reference and a test specimen (version ...-2I only)

Datasheet

FLUID 100 Operating Manual
 

FLUID 200 and FLUID 200-H Operating Manual

Typical applications:

• Calibration and checking of all kind of thermometer
• Calibration and checking of thermostats
• Computer aided calibration via RS232 interface

• Temperature range:
  FLUID 100: -10°C to +125°C;
  FLUID 200: ambient temperature to +200°C;
  FLUID 200-H: ambient temperature to +220°C
• Accuracy of internal reference: ±0.15°C
• Display resolution: 0.01 / 0.1°C (switchable to °F)
• Stability of regulated temperature:
  FLUID 100: ±0.03°C at -10°C, elsewhere ±0.02°C
  FLUID 200 and FLUID 200-H: ±0,02°C
• Max. heating time: 10°C per minute
• Max. cooling time: 3°C per minute
• Time until stabilization: 20 minutes
• Temperature uniformity: ±0.03°C vertical and horizontal
• Fluid bath: aluminum, volume appr. 400 cm³, homogene temperature due to magnetic mixer, adjustable
• Fluid: silicon oil type 47V20 for temperatures below +120°C,
  type 47V100 for higher temperatures
• RS232 interface: included (built-in)
• Fluid bath reservoir: 50 mm diameter x 150 mm dept
• Power supply: 230 VAC (optional: 115 VAC).
• Power consumption: 850 VA
• Case material: metal
• Dimension: 160 x 330 x 300 mm
• Weight: 8 kg

NOTE: the stated accuracy is valid at ambient temperature +10°C...+40°C and is guaranteed for 1 year.

Scope of standard Supply: Calibrator Fluid 100 or Fluid 200 / 200-H Electr. power cable Fuse kit Electr. connection cable for thermostat tests Operating manual Certificate of calibration, traceable Bottel with 500 cm³ of silicone oil Plug for fluid bath for transport purposes Facility to fix glass thermometer soft bag

Aditional at versions FLUID 100-2I, FLUID 200-2I und FLUID 200-H-2I:

• Two inputs for Pt 100 and thermo couples, programmable:
  Pt 100 IEC 3-/4-wire, range -100/+700°C, accuracy ±0.3°C
  Thermocouple type J, range 0-1000°C, accuracy ±1°C
  Thermocouple type K/N/R/S, range 0-1300°C, accuracy ±1°C

Optional Accessories:

• PC-Windows Software "AQ2sp" with RS232 cable
  The software "AQ2sp" allows a remote control of the calibrator, manual or automatic calibration of probes, stress tests / life cycle tests, thermostat tests, creation and printing of certificates.
    
• Tube extension to increase the usable dept of the fluid bath
  
  for FLUID 100                                  and FLUID 200
    
• Conversion kit to get a dry block calibrator with block in aluminum with 9 holes
  more details see datasheet
• Conversion kit to get a dry block calibrator with block in aluminum without hole(s) (to be drilled by customer)
    
• Cooling coil for type FLUID 200, to shorten the cooling time, but also to decrease the minimum operating temperature of type FLUID 200.
  
    
   
• Pt 100 sensor as external reference, optional with DKD certifikate