HOME > 1: Pressure Instruments > Pressure Gauges > 1.2: all stainless steel

All stainless steel Bourdon Tube Pressure Gauges

All stainless steel Bourdon Tube Pressure Gauges EN 837-1 Type 01.18 - DS 40+50:  Data Sheet Type 01.18 - DS 63: Data Sheet Type 01.18 - DS 100+150: Data Sheet Type 01.36 - DS 100+150 NACE Norm: Data Sheet

Type 01.20 - SOLID FRONT DS 63: Data Sheet

Type 01.20 - SOLID FRONT DS 100+150: Data Sheet

Type 01.40 - SOLID FRONT DS 100+150 NACE Norm: Data Sheet

Type 01.30 - SOLID FRONT DS 125: Data Sheet

Type 01.60 - SOLID FRONT DS 125 NACE Norm: Data Sheet

Type 01.19 / 01.21 - HEAVY DUTY DS 100+150: Data Sheet

Type 01.22 - HIGH PRESSURE
0/30,000 psi/bar, 0/40,000 psi/bar, 0/60,000 psi/bar: Data Sheet

The all stainless steel bourdon tube pressure gauges are designed for use in food, beverage, pharmaceutical, cryogenics, chemical and petrochemical processing industries, and in conventional and nuclear power plants. They are built to resist the most severe operating conditions created by the ambient environment and the process medium. An Argonarc welded case/socket (DS 100+150) strengthen the whole construction. A leak tight fit is ensured if the instrument is filled with a dampening fluid to prevent damage due to vibration. The advantages of filling the case of the instrument with a dampening fluid (e.g. glycerine or silicone oil) are: reduced pointer fluctuation, reduced wear of rotating parts of the movement, avoidance of contamination to the internal parts by corrosive atmosphere gases, avoidance of condensation of the front window lens, ensuring the instruments are suitable for use on equipment with very high pulsation and vibration.

Available Case Diameters:

• Case diameter DS 40: Type 01.18 - DS 40
• Case diameter DS 50: Type 01.18 - DS 50
• Case diameter DS 63: Type 01.18 - DS 63
• Case diameter DS 100: Type 01.18 - DS 100 (type 01.36 if as per NACE norm)
• Case diameter DS 150: Type 01.18 - DS 150 (type 01.36 if as per NACE norm)
• SOLID FRONT construction acc. EN 837-1 "S3" - DS 100: Type 01.20 - DS 100 (type 01.40 if as per NACE norm)
• SOLID FRONT construction acc. EN 837-1 "S3" - DS 150: Type 01.20 - DS 150 (type 01.40 if as per NACE norm)
• SOLID FRONT construction - DS 125: Type 01.30 - DS 125 (type Type 01.60 - DS 125 if as per NACE norm
• HEAVY DUTY DS 100: Type 01.19 - DS 100
• HEAVY DUTY DS 150: Type 01.19 - DS 150
• HEAVY DUTY SOLID FRONT DS 100: Type 01.21 - DS 100
• HEAVY DUTY SOLID FRONT DS 150: Type 01.21 - DS 150
• HIGH PRESSURE up to 60,000 psi: Type 01.22 - DS 100 and DS 150

Available Mounting Styles:

• Bottom connection
• Bottom connection with back flange for surface mounting
• Back connection
• Back connection with front flange for panel mounting
• Back connection with bracket for panel mounting

Also available with NH3-scales for Ammonia or free of oil for Oxygen (solid front executions only)

Please refer also to the gauge accessories (Syphons, Cocks, Valves etc.)